Description: There is a saddle front stapling error.
The stitching home position sensor does not go on even when the stitching motor (front) has been driven in reverse for 0.5 sec or more. stitching motor (front, M7S), stitching home position sensor (front, MS7S)
Remedy: - Check the stitching motor (front, M7S) and the stitching home position sensor (front, MS7S).
Code: E5F5-0002
Description: There is a saddle front stapling error.
The stitching home position sensor does not go off even when the stitching motor (front) has been driven in normal direction for 0.5 sec or more. stitching motor (front, M7S), stitching home position sensor (front, MS7S)
Remedy: - Check the stitching motor (front, M7S) and the stitching home position sensor (front, MS7S).
Code: E5F6-8001
Description: There is a saddle butting error.
The paper pushing plate home position sensor does not go on even when the paper pushing plate motor has been driven for 0.3 sec or more. paper pushing plate motor (M8S), paper pushing plate home position sensor (PI14S)
Remedy: - Check the paper pushing plate motor (M8S) and the paper pushing plate home position sensor (PI14S).
Code: E5F6-8002
Description: There is a saddle butting error.
The paper pushing plate home position sensor does not go off even when the paper pushing plate motor has been driven for 80 msec. paper pushing plate motor (M8S), paper pushing plate home position sensor (PI14S)
Remedy: - Check the paper pushing plate motor (M8S) and the paper pushing plate home position sensor (PI14S).
Code: E5F6-8003
Description: There is a saddle butting error.
The number of detection pulses of the paper pushing plate motor clock sensor is lower than a specific value. paper pushing plate motor (M8S), paper pushing plate motor clock sensor (PI1S)
Remedy: - Check the paper pushing plate motor (M8S) and the paper pushing plate motor clock sensor (PI1S).
Code: E5F6-8004
Description: There is a saddle butting error.
The paper pushing plate leading edge sensor does not go off even when the paper pushing plate motor has been driven for 80 msec. paper pushing plate motor (M8S), paper pushing plate leading edge position sensor (PI15S)
Remedy: - Check the paper pushing plate motor (M8S) and the paper pushing plate leading edge position sensor (PI15S).