Description: The voltage of the power supply is faulty (high-voltage error).
While output is being generated, the AD value of the primary DC voltage is 230 (DEC) or more for 100 msec 2 times in sequence. (However, after output, it is not detected for 100 msec.)
Remedy: Replace the high-voltage power supply. Replace the DC controller PCB.
Code: E064-0003
Description: The voltage of the power supply is faulty (high-voltage error).
While output is being generated, the AD value of the developing DC voltage is 224 (DEC) or more for 10 msec 2 times in sequence. (However, after output, it is not detected for 100 msec.)
Remedy: Replace the high-voltage power supply. Replace the DC controller PCB.
Code: E064-0004
Description: The voltage of the power supply is faulty (high-voltage error).
While output is being generated, the AD value of the transfer output current is 205 (DEC) or more for 100 msec 2 times in sequence. (However, after output, it is not detected for 100 msec.)
Remedy: Replace the high-voltage power supply. Replace the controller PCB.
Code: E064-0005
Description: The voltage of the power supply is faulty (high-voltage error).
While output is being generated, the AD value of the transfer output voltage is 0 (DEC) for 100 msec 2 times in sequence. (However, after output, it is not detected for 100 msec.)
Remedy: Replace the high-voltage power supply. Replace the DC controller PCB.
Code: E100-0001
Description: The BD interval is outside a specific range.
After the machine has become ready for image formation (i.e., the scanner motor is ready for operation, and the laser has been turned on), an error has occurred 50 times or more (BD error).
Remedy: Replace the laser unit. Replace the DC controller PCB. Check the wiring.
Code: E110-0001
Description: The scanner motor is faulty.
The scanner motor speed lock signal does not indicate a locked state a specific period of time after the scanner motor has been started.
Remedy: Replace the laser unit. Replace the DC controller PCB. Check the wiring.