Description: Fixing film sensor failure
The fixing film sensor is faulty.
Remedy: - Check the connector of the fixing film sensor. - Replace the fixing film sensor. - Replace the DC controller PCB.
Code: E010-0000
Description: Main motor failure
The main motor is faulty.
Remedy: - Check the connector of the main motor. - Replace the main motor. - Replace the DC controller PCB.
Code: E019-0000
Description: Waste toner full detection
The waste toner full state was detected.
Remedy: Replace the drum unit.
Code: E019-0001
Description: Waster toner full detection sensor failure
The waste toner full state was detected continuously for five or more seconds while the main motor was turning.
Remedy: - Check the connector of the waster toner full sensor. - Replace the waste toner full sensor. - Replace the DC controller PCB.
Code: E052-0000
Description: Duplex unit connection error
Disconnection of the duplex unit was detected after power-on, detection of normal connection to the duplex unit, and start of communication.
Remedy: - Check the connectors of the duplex unit and DC controller PCB. - Replace the duplex controller PCB. - Replace the DC controller PCB.
Code: E100-0000
Description: BD detection PCB failure
The BD detection PCB is faulty.
Remedy: - Check the connector of the BD detection PCB. - Replace the laser scanner unit. - Replace the DC controller PCB.