Description: Saddle sheet creasing error
When the number of detection pulses of the sheet creasing motor clock sensor has dropped below the prescribed number
Remedy: - Check the sheet creasing motor clock sensor (P14) and sheet creasing home position sensor (P121) connectors. - Replace the sheet creasing motor clock sensor (P14) and sheet creasing home position sensor (P121). - Replace the sheet creasing motor (M2).
Code: E5F1-8002
Description: Saddle sheet creasing error
When the sheet creasing home position sensor status fails to change even when the sheet creasing motor is driven for 3 sec.
Remedy: When the sheet creasing home position sensor status fails to change even when the sheet creasing motor is driven for 3 sec.
Code: E5F3-8001
Description: Saddle alignment error
When the alignment plate home position sensor fails to turn ON even when the alignment motor is driven for 0.5 sec. (or driven for 1.67 sec. during the initial operation)
Remedy: - Check the alignment plate home position sensor (P15S) connectors. - Replace the alignment plate home position sensor (P15S). - Replace the alignment motor (M5S).
Code: E5F3-8002
Description: Saddle alignment error
When the alignment plate home position sensor fails to turn OFF even when the alignment motor is driven for 1 sec.
Remedy: - Check the alignment plate home position sensor (P15S) connectors. - Replace the alignment plate home position sensor (P15S). - Replace the alignment motor (M5S).
Code: E5F4-8001
Description: Saddle rear stapler error
When the stitch operation home position sensor fails to turn OFF even when the stitch motor (rear) has been run in the forward direction for at least 0.5 sec.
Remedy: - Check the stitch operation home position sensor (rear, MS5S) connectors. - Replace the stitch operation home position sensor (rear, MS5S). - Replace the stitch motor (rear, M6S).
Code: E5F4-8002
Description: Saddle rear stapler error
When the stitch operation home position sensor fails to turn ON even when the stitch motor (rear) has been run in the reverse direction for at least 0.5 sec.
Remedy: - Check the stitch operation home position sensor (rear, MS5S) connectors. - Replace the stitch operation home position sensor (rear, MS5S). - Replace the stitch motor (rear, M6S).