PrintCopy.info service

Sharp MXM1205

Error Codes List page 1

  • Code: A0-01
  • Description: PCU PWB ROM error
  • Causes: The firmware version-up is not completed properly by interruption of the power during the version-up operation, etc. PCU PWB trouble.
  • Remedy: Use SIM49-1 to perform the firmware version-up procedure again. Replace the PCU PWB.
  • Code: A0-02
  • Description: SCU PWB ROM error
  • Causes: The firmware version-up is not completed properly by interruption of the power during the version-up operation, etc. SCU PWB trouble.
  • Remedy: Use SIM49-1 to perform the firmware version-up procedure again. Replace the SCU PWB.
  • Code: A0-04
  • Description: Scanner expansion PWB (ACU) (ACRE) ROM error
  • Causes: Scanner expansion PWB (ACU) (ACRE) ROM data error. An error occurs during firmware upgrading for some reasons.
  • Remedy: Perform firmware upgrading again.
  • Code: A0-05
  • Description: Scanner expansion PWB (ACU) (ACRE) firmware error
  • Causes: Improper firmware A firmware of a different model is installed. A ROM of a different model is installed.
  • Remedy: Replace the ROM with a proper one. Write the proper firmware. (Upgrade to the proper firmware.)
  • Code: A0-10
  • Description: MFPC PWB ROM error
  • Causes: CTL and the image ROM firmware combination error
  • Remedy: Check the firmware combination of CTL and the image ROM.
  • Code: A0-11
  • Description: Firmware version inconsistency (MFP - PCU)
  • Causes: Firmware combination error between the MFP and the PCU.
  • Remedy: Install the firmware in the all-firmware version-up mode.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us