PrintCopy.info service

Samsung SCX4835FD

Error Codes List page 1

  • Code: A1-1110
  • Display: Error #A1-1110: Turn off then on.
  • Description: After working the main BLDC motor, the Ready signal has not occurred within 1 sec. 1. Harness is defective. Connector is not connected properly. 2. OPC coupler in the toner cartridge has overloaded. 3. Main BLDC motor is defective. 4. Engine board is defective.
  • Remedy: First, turn the machine off then on. If the error persists, refer to the following. 1. Check if the motor connector is connected properly. Reconnect it. 2. OPC coupler has overloaded. After removing the toner cartridge, rotate the OPC coupler. (Spec : 6 kgf.cm) If there is any damage, the OPC coupler can’t rotate well. Replace the toner cartridge. 3. The main BLDC motor is defective. - Unplug the connector from the motor carefully. - Replace the main BLDC motor with new one. 4. If the problem persists, replace the main board.
  • Code: C1-1110, C1-1120
  • Display: Prepare new cartridge / Replace new cartridge
  • Description: The remaining toner cartridge is less than 10% The toner cartridge is at the end of its life.
  • Remedy: 1. Print the supply information report. (Menu > System Setupr > Report > Supplies Info.) Check the life remaining of the toner cartridge. If its life is at the end, turn the machine off and replace the toner cartridge with new one.
  • Code: C1-1410, C1-1411
  • Display: Install toner cartridge.
  • Description: The toner cartridge is not installed.
  • Remedy: 1. Turn the machine off then on. 2. Remove the toner cartridge. Thoroughly roll the cartridge ve or six times to distribute the toner evenly inside the cartridge. And reinstall the toner cartridge
  • Code: C1-1512
  • Display: Not Compatible Toner cartridge.
  • Description: Toner cartridge is not compatible.
  • Remedy: 1. Print the supply information report. Check information of the toner cartridge. 2. If the toner cartridge is not a Samsung genuine toner cartridge, replace with new one.
  • Code: H1-1210
  • Display: Paper jam in Tray2.
  • Description: A paper jam was detected in the feed area of the tray2. 1. Paper was inserted abnormally or was not loaded in the cassette properly. 2. Pick Up unit has a problem.
  • Remedy: 1. Open the Tray2 and remove the jammed paper. 2. If there is any defective part in the pick up unit, replace it.
  • Code: H1-1222
  • Display: Pulled Out Tray2 Cassette
  • Description: The option tray is not inserted perfectly.
  • Remedy: 1. Remove and re-install the option tray.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us