PrintCopy.info service

Roland MDX540 Modela proII

Error Codes List page 1

  • Code: FE:10
  • Display: FE:10
  • Description: Z Limit SW can not be detected.
  • Causes: Z Limit SW is not attached correctly or defective. There is a bad contact or a cut-line in the cable.
  • Remedy: Fix the Z Limit SW at the correct position. Replace the X Limit SW. Check the cable connection or replace the cable.
  • Code: FE:11
  • Display: FE:11
  • Description: A Limit SW can not be detected.
  • Causes: A Limit SW is not attached correctly or defective. There is a bad contact or a cut-line in the cable.
  • Remedy: Fix the A Limit SW at the correct position. Replace the X Limit SW. Check the cable connection or replace the cable.
  • Code: FE:12
  • Display: FE:12
  • Description: Phase signal or encoder of the X Motor becomes out of order in the initial operation.
  • Causes: X Motor is defective. There is a bad connection or cut-line in the cable.
  • Remedy: Replace the X Motor. Check the cable connections or replace the cable.
  • Code: FE:13
  • Display: FE:13
  • Description: Phase signal or encoder of the Y Motor becomes out of order in the initial operation.
  • Causes: Y Motor is defective. There is a bad connection or cut-line in the cable.
  • Remedy: Replace the Y Motor. Check the cable connections or replace the cable.
  • Code: FE:14
  • Display: FE:14
  • Description: Phase signal or encoder of the Z Motor becomes out of order in the initial operation.
  • Causes: Z Motor is defective. There is a bad connection or cut-line in the cable.
  • Remedy: Replace the Z Motor. Check the cable connections or replace the cable.
  • Code: FE:15
  • Display: FE:15
  • Description: Phase signal or encoder of the A Motor becomes out of order in the initial operation.
  • Causes: A Motor is defective. There is a bad connection or cut-line in the cable.
  • Remedy: Replace the A Motor. Check the cable connections or replace the cable.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us