PrintCopy.info service

Ricoh ML325D

Error Codes List page 1

  • Code: 01
  • Description: Transfer roller leak error 1
    A current leak signal for the transfer roller is detected. A current feedback signal for the transfer roller is not detected.
  • Causes: • High voltage supply board defective • Poor connection of the PCU • Transfer/separation unit set incorrectly • Transfer roller damaged
  • Code: 101
  • Description: Exposure Lamp Error
    The peak white level is 64/255 digit or less (8 bit) when scanning the white plate.
  • Causes: • Exposure lamp defective • Exposure lamp stabilizer defective • Exposure lamp connector defective • Dirty scanner mirror or scanner mirror out of position • SBU board defective • SBU connector defective • Lens block out of position • Incorrect position or width of white plate scanning (SP4015)
  • Code: 120
  • Description: Scanner home position error 1
    The scanner home position sensor does not detect the off condition during initialization or copying.
  • Causes: • Scanner home position sensor defective • Scanner drive motor defective • Scanner home position sensor connector defective • Scanner drive motor connector defective • BICU board defective
  • Code: 121
  • Description: Scanner home position error 2
    The scanner home position sensor does not detect the on condition during initialization or copying.
  • Causes: • Scanner home position sensor defective • Scanner drive motor defective • Scanner home position sensor connector defective • Scanner drive motor connector defective • BICU board defective
  • Code: 141
  • Description: Black offset level correction error
    The black level cannot be adjusted within the target value during the automatic SBU adjustment.
  • Causes: • SBU board defective
  • Code: 143
  • Description: SBU white/black level correction error
    The automatic SBU adjustment has • Exposure lamp defective failed to correct the black level. The automatic SBU adjustment has failed to correct the white level twenty times consecutively.
  • Causes: • Exposure lamp defective • Dirty white plate • Incorrect position or width of white plate scanning (SP4015) • BICU board defective • SBU board defective
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us