PrintCopy.info service

OKI C7000

Error Codes List page 1

  • Code: -
  • Display: Replace Belt
  • Description: The belt counter has reached the life value.
  • Remedy: 1) Is the error message displayed? 2) Does the error occur soon after Belt unit replacement?
    Check the belt life. Replace the Belt unit immediately or at the next maintenance.
  • Code: -
  • Display: Replace Fuser
  • Description: The fuser counter has reached the lifevalue
  • Remedy: 1) Is the error message displayed? 2) Does the error occur soon after Fuser unit replacement?
    Check the fuser life. Replace the Fuser unit immediately or at the next maintenance.
  • Code: -
  • Display: Job Offset Home Error
  • Description: The Job offset assy does not operate or cannot detect the home position.
  • Remedy: Does the Job offset assy operate normally?
    Replace the Job offset sensor. Replace the Job offset motor or Engine board.
  • Code: -
  • Display: Running Short of Paper in Tray
  • Description: Running short of paper detected
  • Remedy: Does only small mount of papers (approx. 30 sheets or less) remain?
    Load papers. Check the Paper near end sensor.
  • Code: -
  • Display: Disc Operation Error
  • Description: HDD cannot be written.
  • Remedy: Is the operating procedure correct?
    Confirm the procedure in the manual. Replace the HDD as it is broken.
  • Code: 001 ... 011
  • Display: Service Call 001: Error ~ 011: Error
  • Description: CPU Exception
  • Remedy: Is the error message displayed again? Turn the printer off/on. Replace the SWA board. (The EEPROM needs replacement.)
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us