PrintCopy.info service

Kyocera KMC850

Error Codes List page 1

  • Code: C0030
  • Description: Fax control PCB problem • Processing with the fax software was disable due to a hardware or software problem.
  • Causes: Defective fax control PCB.
  • Remedy: Replace the fax control PCB and check for correct operation.
  • Code: C0070
  • Description: Abnormal detection of fax control PCB incompatibility • In the initial communication with the fax control PCB, any normal communication command is not transmitted.
  • Causes: Defective fax control PCB.
  • Remedy: Replace the fax control PCB and check for correct operation.
  • Code: C0100
  • Description: Scanner main PCB backup memory device problem • Writing or erasing has not completed even after a certain time.
  • Causes: Defective scanner main PCB.
  • Remedy: Replace the scanner main PCB and check for correct operation.
  • Code: C0110
  • Description: Backup memory data problem A • Data in the specified area of the backup memory does not match the specified values.
  • Causes: Problem with the backup memory data.
  • Remedy: Turn safety switch 1 off and back on and run maintenance item U020 to set the contents of the backup memory data again.
  • Code: C0120
  • Description: Drum EEPROM read error • The ASIC of engine controller PCB does not access to the EEPROM of drum PCB normally.
  • Causes: Poor contact in the connector terminals. Defective engine controller PCB or drum PCB.
  • Remedy: Check the connection of connector YC17 on the engine controller PCB and the continuity across the connector terminals. Repair or replace if necessary. Replace the engine controller PCB or drum unit and check for correct operation.
  • Code: C0130
  • Description: Backup memory device problem
  • Causes: Defective scanner main PCB. Data damage of EEPROM.
  • Remedy: Replace the scanner main PCB and check for correct operation. Contact the Service Administrative Division.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us