Canon iR3300
- Code: E202-0001
- Description: The scanner home position sensor does not go OFF when the scanner is moved forward by 40 mm
- Causes: The scanner home position sensor (PS400) is faulty. The scanner motor (M400) is faulty. The reader controller PCB is faulty.
- Remedy: 1. State Does the scanner operate when the power is turned on? NO: See 4.2.9 The No. 1 mirror base does not operate. 2. Scanner home position sensor (PS400), Reader controller PCB Move the No. 1 mirror base by hand from home position. Does the output of the scanner home position sensor change? (J405-2 on the reader controller PCB is 5 V (in HP) or 0V (away from HP)) NO: Replace the sensor. YES: Replace the rear controller PCB.
Error Code | |
Service Mode, Troubleshooting | |
Parts Catalog | |
Compatibility | |
Downloads Files | |
Home |
Send message to us