Ricoh MPC6003SP

Error Code:

Code: SC240-01
Description: LD error: Bk • If LD error terminal of LD driver of corresponding color is asserted after LD initialization. • If an error is detected during initialization of P-MAC which detects Ith/Ieta of LD of corresponding color.
Causes: • LD degradation (LD broken, shift of output characteristics etc.) • The interface harness damaged or not connected correctly. • LD driver defective
Remedy: • Cycle the main power off/on • Replace the LD unit • Replace the harness • Replace the IPU board

	Error Code
	Service Mode, Troubleshooting
	Parts Catalog
	Compatibility
	Downloads Files
	Home