OKI MC352
Error Codes List page 4
|
- Code: 070
- Description: PostScript error
Error is deteced inside the postscript core - Remedy: Take note of the address that is displayed on LCD. Turn off and on the MFP.
- Code: 072
- Description: Engine interface error or CU-PU interface error
- Remedy: Is the CU/PU board installed properly?
Reinstall the CU/ PU board properly. Replace the CU/ PU board.
- Code: 073
- Description: Video error. An error was detected in expanding image data (an invalid data was received)
- Remedy: Is the CU/PU board installed properly? Does the error occur again?
Reinstall it properly. Change the PC to a high-specification one or decrease the resolution, and perform printing again. Replace the CU/ PU board. Replace the interface cable. Reinstall the PC printer driver.
Is the CU/PU board installed properly? Does the error occur again? Does the error depend on print data?
Reinstall it properly. Perform printing again. Print other data. Replace the CU/PU board. Ask design people to analyze the data.
- Code: 074, 075
- Description: Video error. An error was detected in expanding image data.
- Remedy: Is the CU/PU installed properly? Reinstall it properly. Replace it.
- Code: 081
- Description: Parameter matching check error
Reading from or writing into EEPROM or flash memory cannot be made properly. - Remedy: Reading from or writing into EEPROM or flash memory cannot be made properly. Turn off and on the MFP. Replace the CU/ PU board when the symptom persists.
- Code: 104
- Description: An engine EEPROM read/write error was detected.
- Remedy: Does the error occur again? Yes Turn off and on the MFP Replace the CU/PU board.