uhead
My cart
Items:  0, Discount: 0.0%
Total:  0.00 USD
Checkout
div
 
Sign Up now
 
div
Login to my account
e-mail:
pass:
Forgot password
 
div
div
Statistics
Total available
Brands: 38
CDs: 408
Manuals: 22552
 
 
 
Free downloads >> Error Codes >> OKI >> MC352  
Brand: Select model:
OKI MC352 Trouble Error Codes List
Service manual  Download the full PDF version of service manual.

Code Description
001 Machine Check Exception
A hardware error was detected (board failure or insufficient power supply capacity).
002-
006-
009-
011
CPU Exception
020 CU ROM Hash Check Error
024-
025
Kanji Font Error
030 CU RAM Check Error
031-
036
CU optional RAM check error
040 CU EEPROM error
041 CU flash memory error or CU/PU board flash ROM error
042-
043-
045
Flash memory file system error
Accessing the flash ROM directly mounted on the CU/ PU board failed.
052 Image processor driver error
054 A communication error of the scanner unit
A communication error was detected between the Controller and scanner unit.
055 A communication error of the scanner unit
The Controller detected an error after communication between the Controller and scanner unit was established.
057 The timeout of command communication of the scanner
The timeout of command communication was detected between the Controller and scanner unit (A sub code indicates a cause).
01: There is no ACK for a command to start scanning.
02: There is no ACK for a command to cancel scanning.
03: There is no ACK for a command to cancel SIP.
058 An error of the scanner controlling area
An internal error was detected in the scanner controlling area ofthe Controller.
059 A communication error of the scanner unit
The scanner unit detected an error after communication between the Controller and scanner unit was established.
064 SD Card Missing Error
067-
068
Interface monitor error
069 NIC Chip Error
070 PostScript error
Error is deteced inside the postscript core
072 Engine interface error or CU-PU interface error
073 Video error. An error was detected in expanding image data (an invalid data was received)
074-
075
Video error. An error was detected in expanding image data.
081 Parameter matching check error
Reading from or writing into EEPROM or flash memory cannot be made properly.
104 An engine EEPROM read/write error was detected.
106 Engine control logic error
111 Duplex unit for a different model was detected.
112 The 2nd tray for a model different from the MFP was detected.
121 High-voltage power supply interface error
122 Rear-fan error
123 Ambient humidity error or non connection of humidity sensor
124 Ambient temperature error
126 Condensation on the device was detected.
127 An error of exhaust fan of the Fuser
128:05 Image drum fan error
128:08 Front fan error
131-
134
LED head detection error (131=Y, 132=M, 133=C, 134=K)
142 Image drum up-down movement position detection error
153 Image drum unit fuse-cut error
154 Belt unit fusecut error
155 Fuser unit fuse-cut error
160-
163
Toner sensor detection error (160=Y, 161=M, 162=C, 163=K). This error does not occur with the MFP in the factory shipped configuration.
167 Thermistor slope error
168 Compensation thermistor error
169 An error of the Upper Side Thermistor
170-
171
A fuser thermistor short or open circuit was detected.
172-
173
A fuser thermistor temperature error (high or low temperature) was detected.
174 A backup thermistor shot circuit was detected (high temperature)
175 A backup thermistor open circuit was detected (low temperature)
176-177 A backup thermistor temperature error (high or low temperature) was detected.
182 Option unit I/F error
190 System memory overflow
200-
202
PU firmware download error
An error occurred in rewriting the PU firmware.
203-
204-
207-
208-
213-
214-
FFE-
FFF
CU program error (203 to 214 do not occur in general use of the MFP)
Invalid processing was performed with a CU program.
209 Custom Media Type table downloading failure
Custom Media Type table downloading failed.
231 TAG interface error
IA TAG interface error was detected.
01 : A short-circuit error.
03 : TAG communication error.
250 SD card error
251 SD card erasure error
252-
255
SD card security error
256-
257
SD card error
802-
803-
805-
807-
808
SU Exception
809 SU NAND ECC Error
The ECC error that restoration was impossible occurred in NAND FLASH of SU.
811-
812-
813
SU Communication Error
Communication error between the Controller and the Scanner Unit is detected.
814 SU FW Removed
It is an error to notify that SU FW was erased by special key operation from a panel.
890 SU System Memory Overflow
899 CU Disconnect
In the situation that communication between CU and SU was able to establish, SU FW detected that CU FW had disappeared from a communications path (an USB line).
901-
904
Belt temperature error
901: Short circuit
902: Open circuit
903: High temperature
904: Low temperature
918 An alarm of Duplex Fan was detected.
923 A lock error with black image drum
The image drum does not revolve properly.
928 Fuser motor lock error
933 Tray-2 CPU clock frequency error
941-
942-
943-
944
PU Error
A PU error was detected.
941 : Watch Doc Timer Error
942 : Detection of Unassigned Interruption
943 : CPU Error Detection 944 : Dcon Access Error
980 Media jamming error around fuser.
Media is jammed by entangling around the fuser.
983 Duplicate toner cartridge detection error
Multiple toner cartridges for the same color ware detected.
990 Waste toner sensor detection error
991 TAG Color Information Error
A tag of unsettled color information was detected.
 
ubot