Description: Engine PCA electronics error. The main Engine PCA component is not responding
Causes: Engine PCA damaged or wrongly connected. Connector on the formatter damaged (very low probability).
Remedy: Call agent: • Restart the printer. Service engineer: 1. Replace the engine PCA board (95% probabilities). See Engine PCA. 2. If the problem persist, replace the formatter PCA board (very low probability). See Formatter PCA.
Code: 01.12:10
Description: Curing Control PCA failure
Causes: Curing Control to Printmech PCA Cable Curing Control PCA Printmech PCA .
Remedy: Call agent: • Restart the printer. Service engineer: 1. Reseat/Replace Curing Control to Printmech PCA Cable. 2. Replace Curing Control PCA. 3. Replace Printmech PCA (very low probability). See PrintMech PCA.
Code: 01.13:10
Description: Air Curtain and Printzone Heaters Control PCA failure
Causes: Printmech to Air Curtain and Printzone Heaters Control PCA Cable.
Remedy: Call agent: • Restart the printer. Service engineer: 1. Reseat/Replace Printmech to Air Curtain and Printzone Heaters Control PCA Cable. 2. Replace Air Curtain and Printzone Heaters Control PCA. 3. Replace Printmech PCA (very low probability). See PrintMech PCA.
Code: 01.1:10
Description: Printmech electronics error
Causes: Printmech PCA.
Remedy: Call agent: • Restart the printer. Service engineer: 1. Reseat/Replace Printmech to Formater PCA Cables. 2. Replace the Printmech PCA. See PrintMech PCA. 3. Replace the Formatter PCA board (very low probability). See Formatter PCA.
Code: 01.2:10
Description: ISS1 PCA problem
Causes: Printmech to ISS1 PCA cable Main PSU to Printmech PCA cable ISS PCA Printmech PCA.
Remedy: Call agent: 1. Remove/Replace Ink Cartridges. 2. Restart the printer. Service engineer: 1. Reseat/Replace Printmech to ISS1 PCA cable. 2. Reseat/Replace Main PSU to Printmech cable. 3. Replace ISS PCA. See Ink supply station PCAs. 4. Replace PrintMech PCA.. See PrintMech PCA.
Code: 01.3:10
Description: IISS2 PCA problem
Causes: ISS1 to ISS2 Cable ISS PCA.
Remedy: Call agent: 1. Remove/Replace Ink Cartridges. 2. Restart the printer. Service engineer: 1. Reseat/Replace ISS1 to ISS2 PCA cable. 2. Replace ISS PCA. See Ink supply station PCAs