PrintCopy.info service

Zebra 140XiIII

Error Codes List page 2

  • Code: 07
  • Display: ERROR CONDITION RIBBON OUT
  • Description:
  • Causes: For Thermal Transfer: Ribbon not loaded or incorrectly loaded. or Ribbon sensor not sensing ribbon that is correctly loaded.
  • Remedy: Load ribbon correctly. Ensure snap plate is properly installed. Perform media and ribbon sensor calibration.
  • Code: 08
  • Display: WARNING RIBBON IN
  • Description:
  • Causes: For Direct Thermal: Ribbon loaded unnecessarily.
  • Remedy: Remove ribbon. Verify snap plate is properly installed.
  • Code: 09
  • Display: ERROR CONDITION HEAD OPEN
  • Description: Printer stops and ERROR LED flashes.
  • Causes: Printhead is not fully closed. Head-open sensor not detecting position flag, or flag is not in the proper position.
  • Remedy: Close printhead completely. Check head-open sensor and flag for proper operation.
  • Code: 10
  • Display: WARNING HEAD OVERTEMP
  • Description: Printer stops and ERROR LED flashes.
  • Causes: Printhead element is overheated.
  • Remedy: Printer resumes printing when the printhead element cools to normal operating temperature.
  • Code: 11
  • Display: WARNING HESD UNDERTEMP
  • Description: Printer stops and ERROR LED flashes.
  • Causes: Printhead element is not hot enough to print properly. Printhead data cable not properly connected.
  • Remedy: Environment too cold for proper printing. Relocate printer to warmer area. Allow printhead to cool. Disconnect and reconnect printhead cables. Ensure cables are fully inserted into connectors.
  • Code: 12
  • Display: ERROR CONDITION CUTTER JAMMED
  • Description:
  • Causes: Cutter blade is in the media path.
  • Remedy: Turn power Off (O). Remove media, reload media, and turn power On (l). If the error condition persists, check cutter sensors and control board. Replace if necessary.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us