Toshiba e-Studio 451c

Error Code:

Code: E130
Description: 1st drawer misfeeding (Paper not reaching the 1st drawer feed sensor): The paper fed from the 1st drawer does not reach the 1st drawer feed sensor.
Remedy: Open the jam access cover. Is there any paper in front of the upper drawer feed sensor? → YES → Remove the paper. NO Is the upper drawer feed sensor working? (Perform the input check: 03-[FAX]ON/[3]/[H]) ↓→ NO → 1) Check if the connector of the upper drawer feed sensor is disconnected. 2) Check if the connector CN338 on the LGC board is disconnected. 3) Check if the connector pins are disconnected or the harnesses are open circuited. 4) Check if the conductor pattern on the LGC board is short circuited or open circuited. 5) Replace the upper drawer feed sensor. 6) Replace the LGC board. YES Is the upper drawer feed clutch working? (Perform the output check: 03-201) ↓→ NO → 1) Check if the connector of the upper drawer feed clutch is disconnected. 2) Check if the connector CN341 on the LGC board is disconnected. 3) Check if the connector pins are disconnected or the harnesses are open circuited. 4) Check if the conductor pattern on the LGC board is short circuited or open circuited. 5) Replace the upper drawer feed clutch. 6) Replace the LGC board. YES Check the upper drawer feed roller, separation roller and pickup roller. Replace them if they are worn out.

	Error Code
	Service Mode, Troubleshooting
	Parts Catalog
	Compatibility
	Downloads Files
	Home