PrintCopy.info service

Toshiba DP8070

Error Codes List page 1

  • Code: C26
  • Description: Peak detection error
  • Remedy: Does the exposure lamp light? Yes • Check the connectors on the CCD and SLG boards for disconnection. • Check the shading plate on the rear of the original scale for dirt. • Check the CCD board for breaks and short-circuits. • Check the SLG board for breaks and short-circuits. • Replace the lens unit. • Replace the SLG board. No • Check the lamp connectors for disconnection. • Check the thermostat to see if it has blown. • Check electrical continuity of the lamp. • Check SLG board connector pins J9-22, 23, 24, 25 and 26 for disconnection and the harness for breaks and short-circuits. • Check the SLG board for breaks and short-circuits. • Replace the SLG board. • Replace the lamp regulator
  • Code: C27
  • Description: (Home switch does not turn OFF within a fixed time) Carriage initialization error
  • Remedy: The carriage moves only slightly in the feed direction, or the carriage stays is at a position other than the home position and does not move. Yes Check the circuits on the SLG and SDV boards for troubles. No • Check the connector pins for disconnection and the harness for breaks and short-circuits. • Check the SDV board for breaks and short-circuits. • Check the SLG board for breaks and short-circuits. • Replace the SDV board. • Replace the SLG board.
  • Code: C28
  • Description: (Home switch does not turn ON within a fixed time) Carriage initialization error
  • Remedy: Is a loud sound emitted after the carriage bumps into the home position? Yes Cause: The home switch does not turn ON. • Make sure that the switch connector is connected. • Check the circuits on the SLG and SDV boards for troubles. No Cause: The carriage is located at the home position and does not move. • Check the connector pins for disconnection and the harness for breaks and short-circuits. • Check the SDV board for breaks and short-circuits. • Check the SLG board for breaks and short-circuits. • Replace the SDV board. • Replace the SLG board.
  • Code: C29
  • Description: Exposure lamp disconnection detected
  • Remedy: Does the exposure lamp light? Yes • Check the connectors on the CCD and SLG boards for disconnection. • Check the shading plate on the rear of the original scale for dirt. • Check the CCD board for breaks and short-circuits. • Check the SLG board for breaks and short-circuits. • Replace the lens unit. • Replace the SLG board. No • Check the lamp connectors for disconnection. • Check the thermostat to see if it has blown. • Check electrical continuity of the lamp. • Check SLG board connector pins J9-22, 23, 24, 25 and 26 for disconnection and the harness for breaks and short-circuits. • Check the SLG board for breaks and short-circuits. • Replace the SLG board. • Replace the lamp regulator
  • Code: C36
  • Description: Main charger wire cleaning operation abnormal
  • Remedy: (1) Check the main charger. • Is the main charger disconnected? (2) Check the cleaning motor. • Is the motor operating? (3) Replace the LGC board.
  • Code: C37
  • Description: Transfer belt operation abnormal
  • Remedy: (1) Check the transfer belt. • Are the connectors disconnected? • Are the contact switches and limit switches normal? (2) Replace the LGC board.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us