PrintCopy.info service

Sharp MXM754N

Error Codes List page 1

  • Code: A0-01
  • Description: PCU ROM error
  • Causes: The firmware version-up is not completed properly by interruption of the power during the version-up operation, etc. PCU PWB trouble
  • Remedy: Use SIM49-1 to perform the firmware version-up procedure again. Replace the PCU PWB.
  • Code: A0-02
  • Description: SCU ROM error
  • Causes: The firmware version-up is not completed properly by interruption of the power during the version-up operation, etc. SCU PWB trouble.
  • Remedy: Use SIM49-1 to perform the firmware version-up procedure again. Replace the SCU PWB.
  • Code: A0-04
  • Description: Scanner expansion ACU ROM error
  • Causes: Scanner expansion PWB (ACU) (ACRE) ROM data error. An error occurs during firmware upgrading for some reasons.
  • Remedy: Perform firmware upgrading again.
  • Code: A0-15
  • Description: Incompatible DSK BOOT and program firmware
  • Causes: Installation of the normal firmware was performed with a security kit enable.
  • Remedy: Stop installation of the normal firmware.
  • Code: A0-17
  • Description: Inconsistency between the UI data and the CPU firmware version
  • Causes: Combination error between the UI contents data and the CPU UI firmware version.
  • Remedy: Install the firmware in the all-firmware version-up mode.
  • Code: A0-20
  • Description: Conflict firmware and EEPROM data version (MFP)
  • Causes: Inconsistency between the MFP firmware version and the EEPROM data version.
  • Remedy: Check the combination of the firmware.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us