PrintCopy.info service

Sharp MXM264N

Error Codes List page 1

  • Code: A0-01
  • Description: PCU PWB ROM error
  • Causes: The firmware version-up is not completed properly by interruption of the power during the version-up operation, etc. PCU PWB trouble.
  • Remedy: Use SIM49-1 to perform the firmware version-up procedure again. Replace the PCU PWB.
  • Code: A0-02
  • Description: SCU PWB ROM error
  • Causes: The firmware version-up is not completed properly by interruption of the power during the version-up operation, etc. SCU PWB trouble.
  • Remedy: Use SIM49-1 to perform the firmware version-up procedure again. Replace the SCU PWB.
  • Code: A0-04
  • Description: Scanner expansion PWB (ACU) (ACRE) ROM error
  • Causes: Scanner expansion PWB (ACU) (ACRE) ROM data error. An error occurs during firmware upgrading for some reasons.
  • Remedy: Perform firmware upgrading again.
  • Code: A0-10
  • Description: Color profile error
  • Causes: The content of the color profile is abnormal. Combination error between the MFPC PWB firmware and the color profile
  • Remedy: Upgrade the firmware collectively. Replace the MFPC PWB.
  • Code: A0-11
  • Description: Firmware version inconsistency (MFP - PCU)
  • Causes: Firmware combination error between the MFP and the PCU.
  • Remedy: Install the firmware in the all-firmware version-up mode.
  • Code: A0-15
  • Description: Incompatible DSK BOOT and program firmware
  • Causes: Installation of the normal firmware was performed with a security kit enable.
  • Remedy: Stop installation of the normal firmware.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us