PrintCopy.info service

Sharp MXM260

Error Codes List page 1

  • Code: A0-01
  • Description: Security incompatibility error
    When the PCL or the FAX control PWB is installed, it does not match with compatible/incompatible setup of the MCU PWB security.
  • Causes: The security compatibility/incompatibility of the installed PCL or FAX control PWB does not match with that of the MCU PWB.
  • Remedy: Cheek the security compatibility/ incompatibility of each board. Match the security compatibility/incompatibility of the boards.
  • Code: E1-00
  • Description: IMC PWB communication trouble
    Communication trouble between MCU and IMC PWB
  • Causes: IMC PWB connector disconnection. Motherboard connector pin breakage. IMC PWB ROM defect, data failure.
  • Remedy: Check the connectors of the IMC PWB and MCU PWB. Check the grounding of the copier. Check the ROM of the IMC PWB.
  • Code: E1-10
  • Description: IMC PWB trouble
    IMC PWB hardware abnormality
  • Causes: IMC PWB abnormality
  • Remedy: Replace the IMC PWB
  • Code: E1-11
  • Description: IMC PWB ASIC error
    ASIC abnormality on IMC PWB
  • Causes: IMC PWB abnormality
  • Remedy: Replace the IMC PWB
  • Code: E1-12
  • Description: IMC PWB CODEC IC error
    CODEC IC (JBIG chip) abnormality on IMC PWB
  • Causes: IMC PWB abnormality
  • Remedy: Replace the IMC PWB
  • Code: E1-13
  • Description: IMC PWB flash ROM error
    Flash ROM abnormality on IMC PWB
  • Causes: IMC PWB abnormality
  • Remedy: Replace the IMC PWB. When the program download is abnormally terminated, a error may occur. In this case, download the program again.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us