Sharp MX5111N Error Codes List page 1 from 28

  • Code: A0-01
  • Description: PCU PWB ROM error
  • Causes: The firmware version-up is not completed properly by interruption of the power during the version-up operation, etc. PCU PWB trouble.
  • Remedy: Use SIM49-1 to perform the firmware version-up procedure again. Replace the PCU PWB.
  • Code: A0-02
  • Description: SCU PWB ROM error
  • Causes: The firmware version-up is not completed properly by interruption of the power during the version-up operation, etc. SCU PWB trouble.
  • Remedy: Use SIM49-1 to perform the firmware version-up procedure again. Replace the SCU PWB.
  • Code: A0-04
  • Description: Scanner expansion PWB (ACU) (ACRE) ROM error
  • Causes: Scanner expansion PWB (ACU) (ACRE) ROM data error. An error occurs during firmware upgrading for some reasons.
  • Remedy: Perform firmware upgrading again.
  • Code: A0-05
  • Description: Scanner expansion PWB (ACU) (ACRE) firmware error
  • Causes: Improper firmware A firmware of a different model is installed. A ROM of a different model is installed.
  • Remedy: Replace the ROM with a proper one. Write the proper firmware. (Upgrade to the proper firmware.)
  • Code: A0-10
  • Description: Color profile error
  • Causes: The content of the color profile is abnormal. Combination error between the MFPC PWB firmware and the color profile
  • Remedy: Upgrade the firmware collectively. Replace the MFPC PWB.
  • Code: A0-11
  • Description: Firmware version inconsistency (MFP - PCU)
  • Causes: Firmware combination error between the MFP and the PCU.
  • Remedy: Install the firmware in the all-firmware version-up mode.
  • Code: A0-14
  • Description: Inconsistency between the MFP and the CPU firmware version
  • Causes: Combination error between the MFP and the CPU UI firmware version.
  • Remedy: Install the firmware in the all-firmware version-up mode.
  • Code: A0-15
  • Description: Incompatible DSK BOOT and program firmware
  • Causes: Installation of the normal firmware was performed with a security kit enable.
  • Remedy: Stop installation of the normal firmware.