PrintCopy.info service

Sharp AR5620S

Error Codes List page 2

  • Code: E7 11
  • Description: Shading trouble (White correction). The CCD white scan level is abnormal when the shading.
  • Causes: Improper connection of the CCD unit flat cable Dirt on the mirror, the lens, and the reference white plate Copy lamp lighting abnormality CCD unit abnormality MCU PWB abnormality (When occurred in the SPF scan position.) Improper installation of the mirror unit
  • Remedy: Clean the mirror, the lens, and the reference white plate. Check lighting and the light quantity of the copy lamp (SIM05-03). Check the CCD unit. Check the MCU PWB.
  • Code: E7 16
  • Description: Abnormal laser output. When the laser output is stopped, HSYNC is detected.
  • Causes: Laser abnormality MCU PWB abnormality.
  • Remedy: Replace the LSU. Replace the MCU PWB.
  • Code: F2 40
  • Description: ATC sensor value abnormality
  • Causes: Connector connection trouble Toner cartridge installation trouble Sensor breakdown
  • Remedy: Connect the connector again. Install the developing unit again. Replace the developing unit with a normal one.
  • Code: F2 64
  • Description: Toner supply abnormality. When toner near end is detected with the toner supply time of 50% or less. When the toner supply time exceeds 300%.
  • Causes: ATC sensor abnormality Toner supply abnormality
  • Remedy: Replace the toner cartridge. Replace the developing unit.
  • Code: F2 70
  • Description: •Improper cartridge (Destination error, life cycle error) •Identific t ion error •Model error •Type error •Destination error •Data abnormality •Misc error Detail •The destination of the machine differs from that of the CRUM. •The trade mark code of the CRUM differs. •The company code of the CRUM differs. •The boot program model code does not coincide with the CRUM model code. •When the CRUM type is other than genuine/ conversion/production rotation. •The machine destination differs from the CRUM destination.
  • Causes: CRUM chip defect Improper toner cartridge.
  • Remedy: Replace the toner cartridge.
  • Code: F2 74
  • Description: CRUM chip communication error. An error occurs during communication between the MCU and the CRUM chip. The CRUM identification error occurs.
  • Causes: CRUM chip abnormality Developing unit disconnection MCU PWB abnormality
  • Remedy: Replace the toner cartridge. Check installation of the developing unit. Use SIM16 to cancel. Replace the MCU PWB.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us