Sharp AR451N Error Codes List page 1 from 14

  • Code: C1-00
  • Description: MC trouble
    Main charger output abnormality (Output open) Trouble signal is outputted from the high voltage transformer.
  • Causes: The main charger is not installed properly. The main charger is not assembled properly. Disconnection of connector of high voltage transformer. High voltage harness disconnection or breakage.
  • Remedy: Use the SIM 8-2 to check the main charger output. Check for disconnection of the main charger. Replace the high voltage unit.
  • Code: CE-00
  • Description: Another communication error occurs.
  • Causes: Improper connection of the network cable
  • Remedy: Check the connection of the network cable.
  • Code: CE-01
  • Description: The print server card is broken down or is not installed.
    Print server card connection trouble
  • Causes: The print server card is not installed on the controller. Print server card control PWB trouble
  • Remedy: 1. Check that the print server card is installed on the controller. 2. Output the NIC Config. Page to check the NIC version. 3. Replace the NIC.
  • Code: CE-02
  • Description: The specified mail server or FTP server is not found.
    The specified mail server or the FTP server is not found.
  • Causes: Improper connection of the network cable Network setup trouble An error occurs in the SMTP server/ FTP server/ NTS.
  • Remedy: 1. Check that the network cable is properly connected. 2. Check that the connected network supports TCP/IP protocol. 3. Check from the web page that the address of the FTP server or the desktop PC is properly set as the primary/secondary e-mail server address. 4. When the above address is described with the Hostname, check that the DNS server is properly set or not. 5. Check the SMTP server/ FTP server/ NTS for any trouble.
  • Code: CE-03
  • Description: The specified server suspends response during transmission of images.
    The specified server suspends response during transmission of images.
  • Causes: Improper connection of the network cable An error occurs in the SMTP server/ FTP server/ NTS.
  • Remedy: 1. Check that the network cable is properly connected. 2. Check the SMTP server/ FTP server/ NTS for any trouble.
  • Code: CE-04
  • Description: The account name or the password for the FTP server is invalid.
    The entered account name of the FTP server or the password for authentication is invalid.
  • Causes: Improper connection of the network cable Improper registration of the account name or improper password registered in the FTP server as the destination
  • Remedy: 1. Check that the network cable is properly connected. 2. Check the account name or the password registered in the FTP server as the destination.
  • Code: CE-05
  • Description: The directory of the FTP server is invalid.
    The entered directory of the FTP server is invalid.
  • Causes: Improper connection of the network cable Check for existence of the directory name in the FTP server registered as the destination.
  • Remedy: 1. Check that the network cable is properly connected. 2. Check for existence of the directory name in the FTP server registered as the destination.
  • Code: CE-06
  • Description: The specified mail server (POP3) is not found.
    The specified mail server (POP3) is not found. POP3 server access error
  • Causes: Improper connection of the network cable Network setup trouble An error occurs in the POP3 server.
  • Remedy: 1. Check connection of the network cable. 2. Check that the connected network supports TCP/IP protocol. 3. Check on the Web page that the POP3 server address is correctly set. 4. When the above address is described with the Hostname, check that the DNS server is properly set or not. 5. Check for any error in the POP3 server.