Sharp AR317FG Error Codes List page 1 from 13

  • Code: A0-01
  • Description: Security incompatibility error
    When the PCL or the FAX board is installed, it does not match with compatible/incompatible setup of the MCU board security.
  • Causes: The security compatibility/incompatibility of the installed PCL or FAX board does not match with that of the MCU board.
  • Remedy: Cheek the security compatibility/ incompatibility of each board. Match the security compatibility/incompatibility of the boards.
  • Code: E1-00
  • Description: MCU-IMC communication trouble
    Communication establishment error/ framing/parity/protocol error
  • Causes: IMC PWB connector disconnection Motherboard connector pin breakage IMC PWB ROM defect, data failure
  • Remedy: Check the connectors of the IMC PWB and MCU PWB. Check the grounding of the copier. Check the ROM of the IMC PWB.
  • Code: E1-10
  • Description: IMC PWB trouble
    Communication trouble between MCU and IMC PWB
  • Causes: IMC PWB connector disconnection Motherboard connector pin breakage IMC PWB ROM defect, data failure
  • Remedy: Replace the IMC PWB
  • Code: E1-11
  • Description: IMC board ASIC error
    ASIC abnormality on IMC board
  • Causes: IMC board abnormality
  • Remedy: Replace the IMC PWB
  • Code: E1-12
  • Description: IMC board CODEC IC error
    CODEC IC (JBIG chip) abnormality on IMC board
  • Causes: IMC board abnormality
  • Remedy: Replace the IMC PWB
  • Code: E1-13
  • Description: IMC board flash ROM error
    Flash ROM abnormality on IMC board
  • Causes: IMC board abnormality
  • Remedy: Replace the IMC PWB. When the program download is abnormally terminated, a error may occur. In this case, download the program again.
  • Code: E1-14
  • Description: IMC board expanded memory module (DIMM) error
    IMC extended compression memory module installation error IMC extended compression memory access error
  • Causes: IMC expanded memory module installation trouble IMC expanded memory module trouble IMC expanded memory contact trouble IMC board abnormality
  • Remedy: Check installation of the expanded memory module. (Spec: Added to Slot 1.) Replace the expanded memory module. Replace the IMC PWB.
  • Code: E1-15
  • Description: IMC board Page Memory error/SRAM error
    IMC Page Memory Work SRAM abnormality
  • Causes: IMC board abnormality
  • Remedy: Replace the IMC PWB Remarks Print buffer page memory or work SRAM abnormality