Samsung CLP670N

Error Code:

Code: 04-001, 04-002
Display: Error: #04-001. Turn off then on. Error: #04-002. Turn off then on.
Description: Laser beam detect signal has not occurred or is irregular. LSU motor does not operate.
Causes: 1. Harness is defective, Connector is not connected properly. 2. LSU is defective. 3. Main Board is defective.
Remedy: 1. Check the LSU connector on Main PBA. Reconnect it. If necessary, replace it. 2. If the problem persists, replace the LSU or Main PBA.

	Error Code
	Service Mode, Troubleshooting
	Parts Catalog
	Compatibility
	Downloads Files
	Home