Ricoh MP9000
- Code: SC400
- Description: ID Sensor Error 1: Background Adjustment Error
One of the following ID sensor output voltages was detected for Vsg (the reading of the bare drum surface) at ID sensor initialization.
• The reading was less than 4V at PWM=255 (Maximum PWM).
• The reading was over 4V at PWM=0 (Minimum PWM) - Causes: • ID sensor harness, connector was loose, broken, defective
• ID sensor dirty
• ID sensor defective
• IOB defective
• BCU defective
• LD unit defective
• CGB/PPG power pack defective
Error Code | |
Service Mode, Troubleshooting | |
Parts Catalog | |
Compatibility | |
Downloads Files | |
Home |
Send message to us