PrintCopy.info service

OKI MC352

Error Codes List page 6

  • Code: 124
  • Description: Ambient temperature error
  • Remedy: Is the cable from the CU/PU board to the toner sensor board connected properly?
    Re-connect it properly. Replace the toner sensor board.
  • Code: 126
  • Description: Condensation on the device was detected.
  • Remedy: Condensation is likely to form in such a case that a device is carried in from the outdoors. Leave the device untouched for two hours to a half day and turn on the power unit. Does the error occur again? Yes Leave the device untouched and turn on the power unit. Replace a control panel board.
  • Code: 127
  • Description: An error of exhaust fan of the Fuser
  • Remedy: Is the fan's connector properly connected? Does the error occur again?
    Connect properly. Replace the fan's motor. Replace the PU board.
  • Code: 128:05
  • Description: Image drum fan error
  • Remedy: Is the connector of the fan connected properly? Does the error occur again?
    Re-connect it properly. Replace the fan motor. Replace the CU/PU board.
  • Code: 128:08
  • Description: Front fan error
  • Remedy: Is the connector of the fan connected properly? Does the error occur again?
    Re-connect it properly. Replace the fan motor. Replace the CU/PU board.
  • Code: 131 ... 134
  • Description: LED head detection error (131=Y, 132=M, 133=C, 134=K)
  • Remedy: Is the LED head installed properly? Is the LED head fuse broken? Does the error occur again?
    Install the LED head unit. Check the LED head fuse. Check the fuse. Turn off and on the MFP. Replace the LED head unit.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us