PrintCopy.info service

OKI CX2032

Error Codes List page 1

  • Code: -
  • Display: SDRAM ERROR
  • Description: PU board SRAM error
  • Remedy: Does error reoccur? Yes Turn on the printer again. Replace the PU board (PRF).
  • Code: -
  • Display: XXXXXX CRC CHECK NG
  • Description: A PU download data CRC check error.
    After PU data (PU firmware, custom media data and LED head adjustment data) downloading, a CRC check error was detected.
  • Remedy: After PU data (PU firmware, custom media data and LED head adjustment data) downloading, a CRC check error was detected. Turn on the printer again and redownload the data (during usual printer operation, the downloading is not performed and the error does not occur).
  • Code: -
  • Display: LOADER VERSION XX XX
  • Description: PU board Flash ROM hash check error
  • Remedy: Does error reoccur? Yes Turn on the printer again. Replace the PU board (PRF).
  • Code: -
  • Display: WDT ERROR
  • Description: PU firmware went haywire.
  • Remedy: Does error reoccur? Yes Turn on the printer again. Replace the PU board (PRF).
  • Code: -
  • Display: COMMUNICATION ERROR
  • Description: An error in a PUCU interface.
  • Remedy: Is the CU assy installed properly? Does the printer recover from the error by replacing the TBR/TB2-6 board.
    Reinstall the assy properly. Replace the TBR/TB2-6 board. Replace the PU board (PRF).
  • Code: 001
  • Display: Service call 001:Error (C5900)
  • Description: Machine Check Exception Hardware fault detected. (Board defective or Shortage of power supply volume)
  • Remedy: Replace TBR/TB2-6 PCB.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us