PrintCopy.info service

OKI C9300

Error Codes List page 4

  • Code: 063
  • Display: Service Call 063: Error
  • Description: Network comm. Error Abnormal H/W I/F between CU-NIC.
  • Remedy: Is network board set properly? Is error recovered by replacing network board?
    Set properly. Replace Network. Replace TIG board. (Replace EEPROM.)
  • Code: 065
  • Display: Service Call 065: Error
  • Description: NIC Combination Error
  • Remedy: Is proper Network board for the model set?
    Replace NIC card. Replace with proper Network board (MLETB11, etc.).
  • Code: 070
  • Display: Service Call 070: Error
  • Description: CANT_HAPPEN PS firmware fault detected.
    Confirm that error is recovered by turning power OFF/ON.
  • Remedy: Confirm that error is recovered by turning power OFF/ON. Replace TIG board. (Replace EEPROM.)
  • Code: 072
  • Display: Service Call 072: Error
  • Description: Engine communication error I/F error between PU-CU.
  • Remedy: Is CU assembly set properly? Is error recovered by replacing TIG board?
    Set properly. Replace TIG board. (Replace EEPROM.) Replace PU board.
  • Code: 073, 074, 075
  • Display: Service Call 073: Error ~ 075: Error
  • Description: Video overrun detect
  • Remedy: Is CU assembly set properly? Is error recovered by replacing TIG board?
    Set properly. Replace TIG board. (Replace EEPROM.)
  • Code: 090
  • Display: Service Call 090: Error
  • Description: Finisher Stapler Motor Error
  • Remedy: Is the error message displayed again? See Finisher Maintenance Manual.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us