OKI C810

• Code: -
• Display: WDT ERROR R14=xxxx
• Description: PU firmware runaway
• Remedy: Does this error recur? Yes Turn on the power again. Replace the PU board.

• Code: -
• Display: ASIC ERROR
• Description: CU board (CU) DCON access error * DCON clock output abnormity
• Remedy: Does this error recur? Turn on the power again. Replace the CU board. Replace the PU board.

• Code: -
• Display: SDRAM ERROR
• Description: CU board (CU) DCON access error * RAMRD/WR abnormity for VIDEO
• Remedy: Does this error recur? Turn on the power again. Replace the CU board. Replace the PU board.

• Code: -
• Display: ABORT xxx = xxxxxxxx
• Description: PU firmware runaway
• Remedy: Does this error recur? Yes Turn on the power again. Replace the PU board.

• Code: -
• Display: IRQXX_IPT
• Description: PU firmware runaway
• Remedy: Does this error recur? Yes Turn on the power again. Replace the PU board.

• Code: 001
• Display: Contact the Service center. 001: Error
• Description: Machine Check Exception
• Remedy: Replace CU board