PrintCopy.info service

OKI C710

Error Codes List page 1

  • Code: -
  • Display: SDRAM ERROR
  • Description: CU board (CU) DCON access error
  • Remedy: Does this error recur? Yes Turn on the power again. Replace the CU board.
  • Code: -
  • Display: CRC CHECK NG ( )
  • Description: CRC check error of the PU downloaded data
    The CRC check error is detected upon completion of the PU data downloading (PU firmware, Custom media data)
  • Remedy: After turning on the power again, perform downloading again. (This error does not occur during the normal operation because this processing is not carried out.)
  • Code: -
  • Display: LOADER VERSION
  • Description: PU board Flash ROM hash check error
  • Remedy: Does this error recur? Yes Turn on the power again. Replace the PU board.
  • Code: -
  • Display: WDT ERROR R14=XXXX
  • Description: PU firmware runaway
  • Remedy: Does this error recur? Yes Turn on the power again. Replace the PU board.
  • Code: -
  • Display: COMMUNICATION ERROR
  • Description: I/F error between PU and CU
  • Remedy: Is the CU assembly installed normally? Does this error recur?
    Re-install the CU assembly normally. Replace the CU board. Replace the PU board.
  • Code: -
  • Display: ASIC ERROR
  • Description: DCON access error
  • Remedy: Does this error recur? Yes Replace the CU board.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us