PrintCopy.info service

OKI B730

Error Codes List page 1

  • Code: 1-5
  • Description: Cassette Fail - Paper size is not specified.
  • Remedy: FIP1.13: Possible causative parts: GUIDE TRAY LEFT 150 PAPER CASSETTE HVPS/MCU 550 PAPER CASSETTE 1 Does Error occur with Tray 3 or Tray 4? Go to FIP1.22 “No Tray/Tray 3.4". Go to step 2. 2 Does Error still occur, after removing and reinserting the Paper Cassette of Tray 1 and Tray 2? Go to step 3. End of work 3 Checking Paper Cassette Are GUIDE ASSY END, GEAR SECTOR, RACK SIZE, LINK SW SIZE1/2/3 of Paper Cassette of Tray 1 or Tray 2 installed correctly? Go to FIP2.17 GUIDE TRAY LEFT. Reinstall the obstructive parts.
  • Code: 1-6
  • Description: Xero Fail - EP CARTRIDGE is not installed, or incorrectly installed. - EP CARTRIDGE out of specifications is installed.
  • Remedy: FIP1.11 Possible causative parts: HVPS/MCU EP CARTRIDGE GUIDE ASSY CRU R 1 Checking EP CARTRIDGE (1) Is the EP CARTRIDGE appropriate model? Remove the EP CARTRIDGE to check the model. Go to step 2. Replace EP CARTRIDGE. 2 Checking EP CARTRIDGE (2) Install the EP CARTRIDGE again. Does STATUS 1-6 occur again when the power is turned ON? Go to step 3. End of work 3 Checking GUIDE ASSY CRU R Remove GUIDE ASSY CRU R. Is each harness continuous? Go to step 4. Replace GUIDE ASSY CRU R. 4 Checking EP CARTRIDGE (3) Replace the EP CARTRIDGE. Does Error occur again when the power is turned ON? Replace HVPS/MCU. End of work
  • Code: 15-1
  • Description: Xero Warning - Remaining toner in EP CARTRIDGE became low.
  • Remedy: FIP1.16 Possible causative parts: EP CARTRIDGE GUIDE ASSY CRU R HVPS/MCU 1 Checking EP CARTRIDGE Does Error still occur, after installing a new EP CARTRIDGE? Go to step 2. End of work 2 Checking GUIDE ASSY CRU R for continuity Remove EP CARTRIDGE. Remove GUIDE ASSY CRU R. Is each cable of each harness continuous? Replace HVPS/MCU. Replace GUIDE ASSY CRU R.
  • Code: 15-3
  • Description: Near end of paper in Tray 4 - Remaining paper in Tray 4 became low.
  • Remedy:
  • Code: 15-4
  • Description: Near end of paper in Tray 3 - Remaining paper in Tray 3 became low.
  • Remedy:
  • Code: 15-5
  • Description: Near end of paper in Tray 2 - Remaining paper in Tray 2 became low.
  • Remedy: FIP1.15 Possible causative parts: SENSOR LOW PAPER ACTUATOR LOW PAPER PLATE ASSY BTM HVPS/MCU 550 PAPER CASSETTE 550 FEEDER ASSY 1 Checking the sensor for operation Does Error still occur, after Paper Cassette filled with a specified amount of paper is inserted into Tray 2? Go to step 2. End of work 2 Checking ACTUATOR LOW PAPER for function Remove Paper Cassette. Does ACTUATOR LOW PAPER move smoothly, when moving ACTUATOR LOW PAPER up and down with a finger? Does ACTUATOR LOW PAPER go into the sensor part of SENSOR LOW PAPER, when the flag is pushed up? Does ACTUATOR LOW PAPER go out of the sensor part of SENSOR LOW PAPER, when the flag is released? Go to step 3. Replace ACTUATOR LOW PAPER. 3 Checking PLATE ASSY BTM for operation Does PLATE ASSY BTM move ACTUATOR LOW PAPER normally, when PLATE ASSY BTM is pushed or released? Go to FIP2.7 SENSOR LOW PAPER. Replace PLATE ASSY BTM.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us