PrintCopy.info service

Lexmark C520

Error Codes List page 1

  • Code: 110-xx
  • Description: Mirror Motor
    A mirror motor error has occurred.
  • Remedy: 1 Turn the printer off and remove the rear cover. Check connector JMIRR1 for proper connection to system card, printhead cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go to step 2. If connector is damaged on system card, replace system card. Go to “System card removal”. If printhead cable or connector is damaged, replace printhead.Go to “Printhead removal”.
    2 Replace the system card. Go to “System card removal”. Does the error clear? Problem solved. Replace printhead. Go to “Printhead removal”.
  • Code: 111-xx
  • Description: Printhead Error
    An error has occurred in the cyan channel of the printhead.
  • Remedy: 1 Turn the printer off and remove the rear cover. Check connector JINT1 (5V interlock switch cable) for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go to step 2. If connector is damaged on system card, replace system card. Go to “System card removal”. If JINT1 cable or connector is damaged, replace 5V interlock switch.Go to “Front access door 5V interlock switch removal”.
    2 Check connector JPH1 (large printhead cable) for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go to step 3. If connector is damaged on system card, replace system card. Go to “System card removal”. If printhead cable is damaged, replace printhead.Go to “Printhead removal”.
    3 Turn printer power on and check for 5VDC between JINT1 pin 1 (red wire) and ground. Is voltage present? Note: Ground lead of voltmeter can be placed on metal chasis to obtain ground. Go to step 4. Disconnect JINT1 and check for 5VDC between pin 1 of system card connector and ground. If voltage is present, replace 5V interlock switch.Go to “Front access door 5V interlock switch removal”. If voltage is not present, replace system card. Go to “System card removal”.
    4 Reconnect JINT1 if disconnected. Ensure front access door is completely closed. Check for 5VDC between JINT1 pin 3 (white wire) and ground. Is voltage present? Go to step 5. Replace 5V interlock switch.Go to “Front access door 5V interlock switch removal”.
    5 Replace printhead. Go to “Printhead removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.
  • Code: 112-xx
  • Description: Printhead Error
    An error has occurred in the magenta channel of the printhead.
  • Remedy: 1 Turn the printer off and remove the rear cover. Check connector JINT1 (5V interlock switch cable) for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go to step 2. If connector is damaged on system card, replace system card. Go to “System card removal”. If JINT1 cable or connector is damaged, replace 5V interlock switch.Go to “Front access door 5V interlock switch removal”.
    2 Check connector JPH1 (large printhead cable) for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go to step 3. If connector is damaged on system card, replace system card. Go to “System card removal”. If printhead cable is damaged, replace printhead.Go to “Printhead removal”.
    3 Turn printer power on and check for 5VDC between JINT1 pin 1 (red wire) and ground. Is voltage present? Note: Ground lead of voltmeter can be placed on metal chasis to obtain ground. Go to step 4. Disconnect JINT1 and check for 5VDC between pin 1 of system card connector and ground. If voltage is present, replace 5V interlock switch.Go to “Front access door 5V interlock switch removal”. If voltage is not present, replace system card. Go to “System card removal”.
    4 Reconnect JINT1 if disconnected. Ensure front access door is completely closed. Check for 5VDC between JINT1 pin 3 (white wire) and ground. Is voltage present? Go to step 5. Replace 5V interlock switch.Go to “Front access door 5V interlock switch removal”.
    5 Replace printhead. Go to “Printhead removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.
  • Code: 113-xx
  • Description: Printhead Error
    An error has occurred in the yellow channel of the printhead.
  • Remedy: 1 Turn the printer off and remove the rear cover. Check connector JINT1 (5V interlock switch cable) for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go to step 2. If connector is damaged on system card, replace system card. Go to “System card removal”. If JINT1 cable or connector is damaged, replace 5V interlock switch. Go to “Front access door 5V interlock switch removal”.
    2 Check connector JPH1 (large printhead cable) for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go to step 3. If connector is damaged on system card, replace system card. Go to “System card removal”. If printhead cable is damaged, replace printhead. Go to “Printhead removal”.
    3 Turn printer power on and check for 5 V dc between JINT1 pin 1 (red wire) and ground. Is voltage present? Note: Ground lead of voltmeter can be placed on metal chasis to obtain ground. Go to step 4. Disconnect JINT1 and check for 5 V dc between pin 1 of system card connector and ground. If voltage is present, replace 5V interlock switch. Go to “Front access door 5V interlock switch removal”. If voltage is not present, replace system card. Go to “System card removal”.
    4 Reconnect JINT1 if disconnected. Ensure front access door is completely closed. Check for 5 V dc between JINT1 pin 3 (white wire) and ground. Is voltage present? Go to step 5. Replace 5V interlock switch. Go to “Front access door 5V interlock switch removal”.
    5 Replace printhead. Go to “Printhead removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.
  • Code: 114-01
  • Description: Printhead Error
    An error has occurred in the black channel of the printhead.
  • Remedy: 1 Turn the printer off and remove the rear cover. Check connector JINT1 (5V interlock switch cable) for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go to step 2. If connector is damaged on system card, replace system card. Go to “System card removal”. If JINT1 cable or connector is damaged, replace 5V interlock switch. Go to “Front access door 5V interlock switch removal”.
    2 Check connector JPH1 (large printhead cable) for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go to step 3. If connector is damaged on system card, replace system card. Go to “System card removal”. If printhead cable is damaged, replace printhead. Go to “Printhead removal”.
    3 Turn printer power on and check for 5 V dc between JINT1 pin 1 (red wire) and ground. Is voltage present? Note: Ground lead of voltmeter can be placed on metal chasis to obtain ground. Go to step 4. Disconnect JINT1 and check for 5 V dc between pin 1 of system card connector and ground. If voltage is present, replace 5V interlock switch. Go to “Front access door 5V interlock switch removal”. If voltage is not present, replace system card. Go to “System card removal”.
    4 Reconnect JINT1 if disconnected. Ensure front access door is completely closed. Check for 5 V dc between JINT1 pin 3 (white wire) and ground. Is voltage present? Go to step 5. Replace 5V interlock switch. Go to “Front access door 5V interlock switch removal”.
    5 Replace printhead. Go to “Printhead removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.
  • Code: 120-01, 120-02, 120-08, 120-09
  • Description: Fuser Error
    An error has occurred in the fuser.
  • Remedy: 1 Check the input voltage switch on the back of the low volt power supply (LVPS). Is the voltage level (115/230) properly set? Go to step 2. Set switch for proper country voltage.
    2 Turn the printer off and remove the rear cover. Check connector JFUSER1 for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go step 3. If connector is damaged on system card, replace system card. Go to “System card removal”. If fuser cable is damaged, replace cable.
    3 Check connector JLVPS1 for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go step 4. If connector is damaged on system card, replace system card. Go to “System card removal”. If LVPS cable is damaged, replace LVPS. Go to “Low volt power supply (LVPS) removal”.
    4 Remove fuser. Go to “Fuser removal”. Check AC and DC auto-connects on both the fuser and the printer for damage. Are connectors free of damage? Go to step 5. If connector is damaged on fuser, replace fuser. If either of the cable connectors are damaged, replace the appropriate cable.
    5 Check for the following continuity between DC auto-connect and FUSER1. Is continuity present? DC auto-connect JFUSER1 pin 9 pin 9 pin 10 pin 10 Go to step 6. Replace DC fuser cable.
    6 Check for continuity between the following pins of the AC auto-connect and the pins of the connector that connects to the LVPS. Is continuity present? LVPS connector AC auto-connect pin 1 pin 5 pin 2 pin 4 pin 3 pin 1 Go to step 7. Replace AC fuser cable.
    7 Reinstall fuser. Go to “Fuser removal”. Does error clear? Problem solved. Go to step 8.
    8 Replace fuser. Go to “Fuser removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us