Kyocera TASKalfa 420i
- Code: C0630
- Description: DMA problem
DMA transmission of image data does not complete within the specified period of time. - Causes: Poor contact in the connector terminals.
Defective main PWB. - Remedy: Poor contact in the connector terminals. Check the connection the signal cable for CIS and the main PWB, and the continuity across the connector terminals. Repair or replace if necessary.
Defective main PWB. Replace the main PWB and check for correct operation.
| Error Code | |
| Service Mode, Troubleshooting | |
| Parts Catalog | |
| Compatibility | |
| Downloads Files | |
| Home |
Send message to us