Kyocera TASKalfa 300i
- Code: C6150
- Description: Abnormally low fuser thermistor edge temperature
Fuser thermistor 1 is detected 80°C/ 176°F less than 1 s continuously during copying. - Causes: Defective fuser heater 1 or 2.
Installation defectiveness on fuser thermistor 1.
Defective PWB. - Remedy: Defective fuser heater 1 or 2. Replace the fuser heater 1 or 2.
Installation defectiveness on fuser thermistor 1. Check the mounting state of the fuser thermistor 1. If any problem is found, repair it.
Defective PWB. Replace the power source PWB or engine PWB and check for correct operation.
Error Code | |
Service Mode, Troubleshooting | |
Parts Catalog | |
Compatibility | |
Downloads Files | |
Home |
Send message to us