Kyocera-Mita TASKalfa 2550ci Error Codes List page 1 from 13

  • Code: 0030
  • Description: FAX control PWB system error
    Processing with the fax software was disabled due to a hardware problem.
  • Causes: Defective PWB.
  • Code: 0070
  • Description: FAX control PWB incompatible detection error
    In the initial communication with the FAX control PWB, the normal communication command is not transmitted.
  • Causes: Defective FAX software. Defective PWB.Defective PWB.
  • Code: 0100
  • Description: Backup memory device error
  • Causes: Defective flash memory. Defective PWB.
  • Code: 0120
  • Description: MAC address data error
    The data includes an invalid MAC address.
  • Causes: Defective flash memory. Defective PWB.
  • Code: 0150
  • Description: Backup memory read/write error (engine PWB)
    Detecting engine PWB EEPROM communication error.
  • Causes: The engine PWB EEPROM was improperly installed. Defective PWB. Defective EEPROM.
  • Code: 0160
  • Description: Backup memory data error (engine PWB)
  • Causes: Defective flash memory. Defective PWB.
  • Code: 0170
  • Description: Billing counting error
    A checksum error is detected in the main and engine backup memories for the billing counters.
  • Causes: Data in the EEPROM. Defective PWB.
  • Code: 0180
  • Description: Machine number mismatch
    Machine number of main and engine does not match.
  • Causes: Data in the EEPROM.
  • Code: 0320
  • Description: I/O CPU communication error
    A communication error is detected 10 times in succession
  • Causes: Defective PWB.
  • Code: 0620
  • Description: FAX image DIMM error
    DIMM is not installed correctly. DIMM cannot be accessed.
  • Causes: DIMM installed incorrectly. Defective PWB.
  • Code: 0630
  • Description: DMA error
    DMA transmission of image data does not complete within the specified period of time.
  • Causes: Poor contact in the connector terminals. Defective PWB.
  • Code: 0640
  • Description: Hard disk error
    The hard disk cannot be accessed.
  • Causes: Defective connector cable or poor contact in the connector. Defective hard disk.