PrintCopy.info service

Kyocera KM6230

Error Codes List page 1

  • Code: C001
  • Description: Memory PCB communication problem • Problems with data from memory PCB.
  • Causes: Defective memory PCB.
  • Remedy: Replace memory PCB and check for correct operation.
  • Code: C010
  • Description: RAM/ROM problem • Read and write data does not match.
  • Causes: Defective main PCB.
  • Remedy: Replace the main PCB and check for correct operation.
  • Code: C011
  • Description: Backup memory data problem • Data in the specified area of the backup memory does not match the specified values.
  • Causes: Problem with the backup memory data. Defective backup RAM.
  • Remedy: Turn safety switch 1 off and back on and run maintenance item U020 to set the contents of the backup memory data again. If the C011 is displayed after re-setting the backup memory contents, replace the backup RAM.
  • Code: C021
  • Description: Operation unit PCB communication problem • There is no reply after 20 retries at communication.
  • Causes: Poor contact in the connector terminals. Defective main PCB or operation unit PCB.
  • Remedy: Check the connection of connectors CN12, CN13 on the main PCB and CN1, CN7 on the operation unit PCB, and the continuity across the connector terminals. Repair or replace if necessary. Replace the main PCB or operation unit PCB and check for correct operation.
  • Code: C024
  • Description: Printer board communication problem • There is no reply after 20 retries at communication.
  • Causes: Poor contact in the connector terminals. Defective main PCB or printer board.
  • Remedy: Check the connection of connector CN4 on the main PCB and the connector on the printer board. Repair or replace if necessary. Replace the main PCB or printer board and check for correct operation.
  • Code: C026
  • Description: Memory PCB communication problem • There is no reply after five retries at transmitting. • There is no reply after five retries at receiving.
  • Causes: Poor contact in the connector terminals. Defective main PCB or memory PCB.
  • Remedy: Check the connection of connector CN3 on the main PCB and the connector on memory PCB. Repair or replace if necessary. Replace the main PCB or memory PCB and check for correct operation.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us