Kyocera KM5050

Error Code:

Code: C3300
Description: CCD AGC problem After AGC, correct input is not obtained at CCD.
Causes: Poor contact in the connector terminals. Defective exposure lamp. Defective PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector on the SHD PWB and the connector on the CCD PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective exposure lamp. Replace the exposure lamp or inverter PWB. Defective PWB. Replace the SHD PWB or CCD PWB and check for correct operation.

	Error Code
	Service Mode, Troubleshooting
	Parts Catalog
	Compatibility
	Downloads Files
	Home