PrintCopy.info service

Kyocera KM2050

  • Code: C3200
  • Description: Exposure lamp problem
    • Non-lighting of the exposure lamp is detected at the beginning of copying.
  • Causes: Poor contact of the connector terminals. Defective exposure lamp or inverter PCB. Defective engine PCB. Incorrect shading position.
  • Remedy: Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Replace the exposure lamp or inverter PCB. Replace the engine PCB and check for correct operation. Adjust the position of the contact glass (shading plate). If the problem still occurs, replace the scanner home position switch.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us