Konica-Minolta bizhub C450
- Code: C0204
- Description: Tray 2 elevator failure
• The lift-up sensor is not blocked even after the lapse of a given period of time after the lifting motion has been started. - Remedy: 1 Check the M101 connector for proper connection and correct as necessary. 2 Check the connector of M101 for proper drive coupling and correct as necessary. 3 PC115 I/O check PWB-Z PJ6Z-3 (ON) T to U-26. 4 M101 operation check PWB-Z PJ4Z-4 to 5 M-24. 5 Change PWB-Z.
Error Code | |
Service Mode, Troubleshooting | |
Parts Catalog | |
Compatibility | |
Downloads Files | |
Home |
Send message to us