Konica-Minolta bizhub 40P Error Codes List page 1 from 3

Exploded Views and Parts List Free!

  • Code: 0017
  • Display: MAIN MOTOR
  • Description: Main motor malfunction
    - The speed of the main motor (M1) does not reach the predetermined value.
  • Causes: Main motor Print control board (PRCB)
  • Remedy: 1 Check the M1 connector for proper connection and correct as necessary. 2 Check M1 for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary . 4 M1 operation check DCPU P/J43-5 (ON) P.183 5 Change M1 6 Change PRCB
  • Code: 0046
  • Display: FUSER FAN
  • Description: Fusing cooling fan motor malfunction
    - The fusing cooling fan motor (FM1) develops a rotation failure or other malfunction.
  • Causes: Fusing cooling fan motor (FM1) Print control board (PRCB)
  • Remedy: 1 Check the FM1 connector for proper connection and correct as necessary . 2 Check the fan for possible overload and correct as necessary. 3 FM1 operation check PRCB P/J24-16 (ALARM) P.187 4 Change FM1 5 Change PRCB .
  • Code: 0300
  • Display: POLYGON MOTOR
  • Description: Polygon motor malfunction
    - The interval of the /BD signal is retarded relative to the predetermined value after the polygon motor has started rotating.
    - The interval of the /BD signal is retarded relative to the predetermined value after it has reached the predetermined value.
    - The laser beam output does not reach the predetermined value.
  • Causes: PH unit Print control board (PRCB)
  • Remedy: 1 Check the cable and connector for proper connection and correct as necessary. 2 Change PH unit 3 Change PRCB
  • Code: 0500
  • Display: FUSER ERROR
  • Description: Heating roller warm-up failure
    - The fusing temperature does not reach the predetermined value after the lapse of the predetermined period of time.
    - The heater lamp remains ON for 10 sec. or more in the standby state.
    - The fusing temperature is 125 °C or less during a print cycle.
    - The fusing temperature is 220 °C or more. • An open-circuited thermistor is detected.
  • Causes: Fuser unit DC power supply (DCPU) Print control board (PRCB)
  • Remedy: 1 Check the fuser unit for correct installation (whether it is secured in position). 2 Check the fuser unit, DCPU, and PRCB for proper connection and correct as necessary. 3 Change fuser unit 4 Change PRCB 5 Change DCPU
  • Code: 13E3
  • Display: FLASH DEVICE
  • Description: Flash ROM device fault
    - An erase error occurs during erasing of data in flash ROM.
  • Causes: Print control board (PRCB) MFP board (MFPB)
  • Remedy: 1 Check the MFPB for proper connection and correct as necessary. 2 Change PRCB 3 Change MFPB
  • Code: C002
  • Display: RAM ERROR
  • Description: RAM error at startup (standard memory)
    - RAM error at standard memory is detected during printer start-up.
  • Causes: MFP board (MFPB) DIMM (standard/option)
  • Remedy: 1 Reboot the main body. 2 Check connection state of the standard/ expanded memory and correct as necessary. 3 Check the MFPB connector for proper connection and correct as necessary. 4 Change the standard/expanded DIMM. 5 Change MFPB
  • Code: C003
  • Display: RAM ERROR
  • Description: RAM error at startup (expanded memory)
    - RAM error at expanded memory is detected during printer start-up.
  • Causes: MFP board (MFPB) DIMM (standard/option)
  • Remedy: 1 Reboot the main body. 2 Check connection state of the standard/ expanded memory and correct as necessary. 3 Check the MFPB connector for proper connection and correct as necessary. 4 Change the standard/expanded DIMM. 5 Change MFPB
  • Code: C013
  • Display: H/W ADDRESS
  • Description: MAC address error at startup
    - Invalid MAC address is detected during printer start-up.
  • Causes: MFP board (MFPB)
  • Remedy: 1 Reboot the main body. 2 Check the MFPB connector for proper connection and correct as necessary. 3 Change MFPB