Konica-Minolta bizhub 223
- Code: D-1
- Description: Split line detect
-When the main/sub power switches are turned ON or when the machine is recovering from the power save mode, if the original cover is not open, the cleaning brush rotates 360 degrees to detect whether or not stain exists in the original reading section. This warning will be displayed if the original is set to ADF when stain exist.
- The thin line detection level and the warning display can be changed by the following setting. Split Line Detect. Setting - Remedy: 1 Wipe clean the glass surface of the DF original glass. 2 Check the glass cleaning roller unit for proper installation and correct if necessary. 3 Select [Service Mode] - [System 2] - [Split Line Detect. Setting], and change the setting. 4 Check the DFCB connector for proper connection and correct as necessary. 5 M4 operation check. 6 Change glass cleaning brush. 7 Change DFCB.
| Error Code | |
| Service Mode, Troubleshooting | |
| Parts Catalog | |
| Compatibility | |
| Downloads Files | |
| Home |
Send message to us