PrintCopy.info service

Konica-Minolta Di551

Error Codes List page 1

  • Code: E22-03
  • Description: Fan abnormality
    An error for BINFF_EM signal is detected when 2 seconds have passed since FM12 (developer cooling) has turned ON. The error does not clear after 2 seconds from OFF/ON operation.
  • Causes: FM12 (developer cooling) PRCB (printer control board)
  • Code: E23-04
  • Description: PCL connection abnormality
    Failure of PCL connection is detected.
  • Causes: PCL
  • Code: E46-01
  • Description: Image control abnormality
    During image write, APC cannot be performed for sub-scanning beam correction. The 12 VDC power for driving the laser is not supplied. The laser does not turn ON due to defective laser, or MPC value is different. The index sensor cannot detect the laser because the polygon mirror does not rotate, the index sensor is displaced, or the index sensor is defective.
  • Causes: Write section ICB (image control board) power connector
  • Code: E46-02
  • Description: Image control abnormality
    Illegal address of FIFO for scanner. During image read, image data compression is not completed normally.
  • Causes: ICB (image control board) Expansion memory
  • Code: E46-03
  • Description: Image control abnormality
    Illegal address of FIFO for printer. During image read, image data decompression is not completed normally.
  • Causes: ICB (image control board) Expansion memory
  • Code: E46-05
  • Description: Image control abnormality
    The FIFO of the compression / expansion chip caused an error interrupt.
  • Causes:
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us