PrintCopy.info service

HP LaserJet M1005 MFP

Error Codes List page 1

  • Code: -
  • Display: Engine comm. Error
  • Description: The device has experienced an internal hardware error.
  • Remedy: 1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. If a surge protector is being used, remove it. Plug the device directly into the wall socket. 3. Turn on the power and wait for the device to initialize.
  • Code: 50.1
  • Display: Fuser Error Turn off then on
  • Description: The device has experienced an internal hardware error.
  • Remedy: 1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. If a surge protector is being used, remove it. Plug the device directly into the wall socket. 3. Turn on the power and wait for the device to initialize.
  • Code: 50.2
  • Display: Fuser Error Turn off then on
  • Description: The device has experienced an internal hardware error.
  • Remedy: 1. Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize. 2. If a surge protector is being used, remove it. Plug the device directly into the wall socket. Use the power switch to turn the device on.
  • Code: 50.3
  • Display: Fuser Error Turn off then on
  • Description: The device has experienced an internal hardware error.
  • Remedy: 1. Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize. 2. If a surge protector is being used, remove it. Plug the device directly into the wall socket. Use the power switch to turn the device on.
  • Code: 50.8
  • Display: Fuser Error Turn off then on
  • Description: The device has experienced an internal hardware error.
  • Remedy: 1. Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize. 2. If a surge protector is being used, remove it. Plug the device directly into the wall socket. Use the power switch to turn the device on.
  • Code: 50.9
  • Display: Fuser Error Turn off then on
  • Description: The device has experienced an internal hardware error.
  • Remedy: 1. Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize. 2. If a surge protector is being used, remove it. Plug the device directly into the wall socket. Use the power switch to turn the device on.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us