Description: Initialization/Startup
While in the Startup state, the Go, Ready, and Attention lights cycle (at the rate of 500 ms) one after another
Remedy: During the Initialization and Job Cancel processes, pressing buttons has no effect.
Code: 02
Display: OFF
OFF
OFF
OFF
Description: Blank Display
Remedy: Verify the formatter connection to the Engine Controller PCA is seatted and secure (J531).
Code: 03
Display: OFF
OFF
ON
OFF
Description: Ready
The device is ready with no job activity.
Remedy: To print a Configuration page, press and release the Go button.
Code: 04
Display: OFF
OFF
Blinking
OFF
Description: Processing Data
The device is processing or receiving data.
Remedy: To cancel the current job, press the Cancel button.
Code: 05
Display: OFF
Blinking
ON
OFF
Description: Manual Feed or Continuable Error
This state occurs in the following circumstances:
- Manual feed
- General continuable error
Remedy: To recover from the error and print the available data, press the Go button.
If the recovery is successful, the device continues to the Processing Data state and completes the job.
If the recovery is unsuccessful, the device continues to the Continuable Error state. Try removing any media from the media path and cycling the device power.
Code: 06
Display: OFF
Blinking
OFF
OFF
Description: Attention
- Print-cartridge door is open
- Paper jam
- Paper out
Remedy: Close the print-cartridge door, remove the paper jam, install the cartridge, or add paper.