Epson Stylus Pro 4800

Error Code:

Code: 0001001D
Description: CR servo parameter error
There may be a case where a voltage exceeding the specified value is about to be applied to the CR Motor. In such a case, this message is displayed and the printer stops operating.
Causes:
Remedy: 1. Check for dirt, paper dust or damage to the CR Scale 2. Perform the CR Timing Belt Tension Adjustment 3. Replace the CR Encoder Sensor 4. Replace the Motor Assy., CR 5. Replace the C593 MAIN Board

	Error Code
	Service Mode, Troubleshooting
	Parts Catalog
	Compatibility
	Downloads Files
	Home