PrintCopy.info service

Canon imageCLASS 3222

Error Codes List page 1

  • Code: E000
  • Description: The thermistor has an open circuit or a short circuit.
    The heater has an open circuit.
    The thermal fuse has blown.
    The High-voltage power supply board has a fault.
    The DCNT board has a fault.
  • Remedy: - Check the connector of the fixing film unit.
    - Replace the fixing film unit.
    - Replace the High-voltage power supply board.
    - Replace the DCNT board.
  • Code: E100
  • Description: The scanner assembly has a fault.
  • Remedy: - Check the connector of the laser scanner assembly.
    - Replace the laser scanner assembly.
    - Replace the engine controller PCB.
  • Code: E198
  • Description: Flash ROM write error.
  • Remedy: - Turn the power OFF and then back ON.
    - Replace the SCNT board.
  • Code: E225
  • Description: CIS lamp has a fault.
  • Remedy: - Turn the power OFF and then back ON.
    - Replase the CIS unit.
  • Code: E674
  • Description: Modem error.
  • Remedy: - Turn the power OFF and then back ON.
    - Replace the SCNT board.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us