PrintCopy.info service

Canon iPF8000

Error Codes List page 2

  • Code: 1013
  • Display: Problem with Printhead L Chk printing results
  • Description: Printhead L non-ejection warning (doublehead model) (Check printout/ possible to continue printing) See 280C for detection criteria.
  • Remedy: 1. Check image quality. (Unless there are problems with the image quality, there is no need to replace the printhead.) 2. Replace the printhead.
  • Code: 1015
  • Display: This type of paper is not compatible with HP-GL/2.
  • Description: HP-GL2 error: out of the scope of paper support [Warning Indication] or [Pause] have been selected for [Paper Mismatch Detection]. The paper that is being fed does not support HP-GL/2 printing; that is, a paper type that does not have a required print mode has been set.
  • Remedy: When [Warning Indication] is selected Replace with appropriate paper. When [Pause] is selected 1. Press the [Online] button to force printing. Caution) Due to use of image process table (LUT) defined for HP-GL/2 compatible paper different from the specified paper, you might have a problem in quality of image. 2. Press the [Stop] button to cancel printing.
  • Code: 1021
  • Display: Papr Type Mismatch
  • Description: Paper mismatch (type) With [Warning Indication] is selected for [Paper Mismatch Detection], the type of loaded paper mismatches the specified type. Or, with [Pause] is selected for [Paper Mismatch Detection], the [Online] button was pressed to execute forced printing.
  • Remedy: Continued printing is allowed. Check driver setting. Replace with appropriate paper.
  • Code: 1022
  • Display: Papr Type Mismatch
  • Description: Paper mismatch (type) With [Warning Indication] is selected for [Paper Mismatch Detection], the type of loaded paper mismatches the specified type. Or, with [Pause] is selected for [Paper Mismatch Detection], the [Online] button was pressed to execute forced printing.
  • Remedy: Continued printing is allowed. Check driver setting. Replace with appropriate paper.
  • Code: 1030
  • Display: GARO W1221
  • Description: (Image mode)Unknown command A character that is located within bounds of a group character or end parameter character but that is not defined as a command has been detected during Image mode command decoding.
  • Remedy: 1. Identify the model. 2. If the error has occurred with RIP, try with the printer driver. 3. Try in an alternative environment (I/ F, PC).
  • Code: 1031
  • Display: GARO W1222
  • Description: (Image mode) Invalid parameter count (no parameters) A numeric field has not been identified as being numeric during Image mode command decoding.
  • Remedy: 1. Identify the model. 2. If the error has occurred with RIP, try with the printer driver. 3. Try in an alternative environment (I/ F, PC).
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us