Canon NP6045

• Code: E000
• Description: Fuser did not heat up. Lamp, thermal switch, thermistors, connections, AC driver, DC controller, SSR, etc.

• Code: E001
• Description: Fuser temperature too high. Same possibilities as E000, as well as shorted wire.

• Code: E002
• Description: Fuser temperature not rising at correct pace, same possibilities as E000.

• Code: E003
• Description: Fuser temperature drops. Same as E000.

• Code: E004
• Description: Fuser problem: AC driver, SSR bad, wire shorted.

• Code: E005
• Description: Fuser cleaning web, or problem with sensor, lever or connector. Service mode 6 is the probably reset for this.